Description
The Magswitch 90 Degree welding angle is a game - changer. It comes with two MagSquare magnets, each boasting a 400lb/178kg holding force on every axis. These magnets can hold both flat and round steel. They can move up and down and be reversed on each axis. Here are its top features:
- It's a 10 - inch welding angle with two super - strong 400 - pound breakaway capacity magnets
- Unlike other brands, when the Magswitch is off, debris falls away easily
- It offers fast and easy on/off magnet control
- You can reverse it for inside or outside holding
- It can hold flat materials and pipes
- It has a non - marring hold
- There's a locking knob for extra safety
- You can add more Magswitches to increase strength
- It's versatile with pre - tapped holes to adjust the Magswitch position for different angles
- Turn the Magswitch knob 180 degrees to activate or deactivate it
- As you turn the knob, the holding force gradually increases, enabling precise positioning
Using the Magswitch 90 Degree Angle 400 is a breeze. First, decide whether you need an inside or outside hold and reverse the magnets accordingly. Then, place it on the flat or round steel you want to work with. To activate the magnet, simply turn the knob 180 degrees. As you turn, you'll notice the holding force gradually increasing, allowing you to position it precisely. When you're done, turn the knob back to deactivate the magnet, and debris will fall away easily. Safety is important, so make sure to use the locking knob when needed. If you need more strength, you can add additional Magswitches. For maintenance, keep it clean and store it in a dry place. Avoid exposing it to extreme temperatures. That's all you need to know to make the most of your Magswitch 90 Degree Angle 400.
