Description
The Magswitch 90 Degree Angle 600 comes with two MagSquare magnets. Each magnet offers a powerful 600lb/272kg holding force on 3/8 - inch steel in every axis. It can securely hold both flat and round steel. The magnets can move up and down and are reversible on each axis. You can add more MagSquare units to boost the strength.
- It's a 12 - inch welding angle equipped with two super - strong magnets with a 600 - pound breakaway capacity.
- Different from competing brands, when the Magswitch is off, debris can easily fall away.
- You can control the magnet quickly and easily, turning it on or off.
- It's reversible for either inside or outside holding.
- It can hold flat materials and pipes.
- It provides a non - marring hold.
- There's a locking knob for extra safety.
- You can add more Magswitches to increase the strength.
- It's highly versatile with pre - tapped holes to adjust the Magswitch position for inside or outside angles.
- Just turn the Magswitch knob 180 degrees to activate or deactivate it.
- As you turn the knob, the holding force of the Magswitch gradually increases, enabling precise positioning.
Using the Magswitch 90 Degree Angle 600 is a breeze. First, decide if you need an inside or outside hold and reverse the magnets accordingly. Place it on your 3/8 - inch steel surface, whether it's flat or round. To control the magnet, simply turn the knob. A 180 - degree turn will activate or deactivate it. As you turn the knob, the holding force builds up gradually, which helps you position the item precisely. You can also add more MagSquare units or Magswitches if you need extra strength. For safety, use the locking knob. When the Magswitch is off, any debris on it will easily fall away. To maintain it, keep it clean and store it in a dry place. Avoid using it on surfaces that are much thicker or thinner than 3/8 - inch steel, as the holding force might not work as expected.
