Description
This compact 51 - lb, 230/208V 1 PH plasma cutter packs enough power to cut 7/8 in. mild steel. Its rated cutting capacity ensures a steady and precise cut when traveling at about 15 inches per minute, meeting your typical cutting needs.
With automatic air regulation, there's no need for a pressure gauge or manual regulator. The unit adjusts air pressure to the torch for top - notch cutting and gouging, hassle - free.
The Ultra - Quick Connect™ torch offers the fastest connection and removal in the industry. It's also CNC/Automation cutting capable, with factory - ready models and retrofit kits available.
Wind Tunnel Technology™ keeps abrasive dust away from internal parts, and the Fan - On - Demand™ cooling system runs only when required, reducing dust intake in dirty environments.
The Ultra - Quick Connect™ work cable and clamp make setup and storage a breeze. And the Auto - Refire™ technology automatically controls the pilot arc when cutting expanded metal or multiple metal pieces, reducing hand fatigue.
Included with Product
- Plasma cutter
- XT60T hand - held torch with 20 ft (6 m) cable
- Heavy - duty work clamp with 20 ft (6 m) cable
- 10 ft (3 m) power cord
- Extra consumables (2 electrodes, 2 tips, 1 extended tip, and 1 deflector)
Specifications
Click the image below to view the full spec sheet
Review Video
Using your Miller Spectrum 875 Plasma Cutter is straightforward. First, connect the 10 ft power cord to a suitable power source. Then, attach the XT60T hand - held torch and the heavy - duty work clamp using their Ultra - Quick Connect™ features. When cutting, make sure the material is within the 7/8 in. mild steel rated capacity. Let the machine's automatic air regulation do its job for great cutting results. When cutting expanded metal or multiple pieces, the Auto - Refire™ technology will take care of the pilot arc, so you don't have to worry about re - triggering manually. As for maintenance, keep the unit in a clean place. Thanks to the Wind Tunnel Technology™ and Fan - On - Demand™, it's more resistant to dust. But still, regularly check the extra consumables like electrodes and tips. Replace them when they show signs of wear. And always refer to the full spec sheet for detailed information.
