Description
This compact, 51 - lb, 230/208V 1 PH plasma cutter packs a punch, offering ample power to cut 7/8 - inch mild steel. Here are its amazing features:
Rated Cutting Capacity
It's rated to cut at about 15 inches per minute for a steady, precise cut. This rating ensures it meets or beats your typical cutting thickness needs.
Automatic Air Regulation
For your convenience, there's no pressure gauge or manual regulator knob. The cutter automatically adjusts air pressure to the torch for top - notch cutting and gouging. No adjustments required!
Ultra - Quick Connect™ Torch
It has the fastest plasma torch and work cable connection and removal in the industry.
CNC/Automation Cutting Capable
Factory - ready CNC/Automation models are available with long or short body torches. There are also retrofit kits to turn handheld machines into CNC/Automation cutters.
Wind Tunnel Technology™ and Fan - On - Demand™
Wind Tunnel Technology protects internal components from abrasive dust and particles. The Fan - On - Demand cooling system runs only when needed, reducing the amount of airborne dust pulled through in dirty environments.
Ultra - Quick Connect™ Work Cable & Clamp
The work cable and clamp make setup and storage fast and easy. The new ultra - flexible Quick Connect work lead comes with a smaller heavy - duty clamp.
Auto - Refire™ Technology
When cutting expanded metal or multiple metal pieces, it automatically controls the pilot arc. It switches the pilot arc in and out as needed, provides maximum power for thick metal, and eliminates the need for manual re - triggering, reducing hand fatigue.
Included with Product
- Plasma cutter
- ICE - 60T hand - held torch with 20 ft (6 m) cable
- Heavy - duty work clamp with 20 ft (6 m) cable
- 10 ft (3 m) power cord
- Extra consumables (2 electrodes, 2 tips, 1 extended tip, and 1 deflector)
Specifications
Click the image below to view the full spec sheet
Review Video
Using the Miller Spectrum 875 Plasma Cutter is easy. First, connect the 10 - ft power cord to a suitable 230/208V 1 PH power source. Attach the ICE - 60T hand - held torch with its 20 - ft cable and the heavy - duty work clamp with its 20 - ft cable. You don't need to adjust the air pressure as the cutter does it automatically. When cutting, make sure to maintain a speed of about 15 inches per minute for a precise cut. If you're cutting expanded metal or multiple pieces, the Auto - Refire™ Technology will take care of the pilot arc for you. For maintenance, keep the cutter in a clean place. The Wind Tunnel Technology and Fan - On - Demand™ features help protect it from dust, but it's still a good idea to wipe it down regularly. Replace the consumables like electrodes and tips when they show signs of wear. Also, when storing the cutter, use the Ultra - Quick Connect™ work cable and clamp for easy setup and storage later.
