Description
Optimized Wire Feeding
- When you tighten the diffuser, the contact tip aligns and centers with the liner lock, creating a perfect wire-feed path. This helps reduce burnbacks, bird-nesting, and erratic arcs.
Error-Proof Replacement
- Replace and trim liners precisely every time without measuring! Load and lock the liners from the front of the gun, then lock and trim them flush with the power pin cap at the back. This reduces wire-feeding problems caused by improper liner trim lengths.
*Use with .035 - .045 wire sizes
*Compatible with the MDX-250 MIG Gun
Using this Miller AccuLock MDX MIG Gun Liner is a breeze. First, make sure you're using it with .035 - .045 wire sizes and that it's compatible with the MDX - 250 MIG Gun. When tightening the diffuser, it aligns the contact tip with the liner lock for a smooth wire - feed. For replacement, load and lock the liner from the front of the gun and then lock and trim it at the back with the power pin cap. No need to measure, just do it right every time. As for maintenance, check the wire - feed path regularly for any signs of blockage or wear. Keep it clean to ensure long - lasting performance and optimal wire - feeding.
