Description
Optimal Wire Feeding
- When you tighten the diffuser, the contact tip aligns perfectly with the liner lock. This creates a smooth wire - feed path, minimizing burnbacks, bird - nesting, and inconsistent arcs.
Foolproof Replacement
- Replace and trim the liners accurately every time without any measuring. Load and lock the liners from the front of the gun, then lock and trim them flush with the power pin cap at the back. This helps reduce wire - feeding problems caused by incorrect liner trim lengths.
*Designed for .030' - .035' wire sizes
Accessories
Using this Miller AccuLock MDX MIG gun liner is a breeze. First, make sure you're using it with .030 - .035 wire sizes as specified. When replacing the liner, you don't need to measure. Just load and lock it from the front of the gun, then go to the back and lock and trim it flush with the power pin cap. This ensures accurate replacement every time. To keep your liner in good shape, regularly check the wire - feed path for any signs of blockage or wear. If you notice burnbacks, bird - nesting, or erratic arcs, check the alignment of the contact tip and liner lock. Make sure the diffuser is tightened properly for a smooth wire - feed. Always store the liner in a dry place to prevent any damage.
