Product Description
Upgrade your Lincoln Pro-100, Pro-Core 100, Weld-Pak 100, and Weld-Pak 100Hd from a flux core welder to a powerful MIG welder with this Lincoln Mig Conversion Kit. It comes with a 0.6 - 0.8mm cable liner, two 0.025 contact tips, a gas nozzle, a 2 lb. spool of 0.025 SuperArc L-56 mild steel MIG wire, a gas regulator for Argon and Argon - blend gases, an adapter for CO2 cylinders, a 115V gas solenoid, hoses, connectors, and clear instructions.
Using this Lincoln MIG conversion kit is easy. First, gather all the components included in the kit. Make sure your welder is turned off and unplugged before you start the conversion process. Connect the cable liner, contact tips, and gas nozzle according to the instructions. Attach the gas regulator to the appropriate gas source, either Argon, Argon - blend, or use the CO2 cylinder adapter for CO2. Load the 2 lb. spool of SuperArc L - 56 mild steel MIG wire. Connect the hoses and connectors as shown. Once everything is set up, plug in the gas solenoid and turn on your welder. Before you start welding, do a test run to ensure everything is working properly. When using the kit, always wear proper safety gear like welding gloves and a face shield. Keep the work area clean and free from flammable materials. For maintenance, regularly check the cable liner for any signs of wear and tear. Clean the contact tips and gas nozzle after each use to keep them in good condition. Store the kit in a dry place when not in use to prevent rusting and damage.
